Nasal Cannula with 2.1m Oxygen Tubing - Adult, Aero Healthcare
This adult nasal cannula from Aero Healthcare has two soft, flexible nasal prongs on a line that runs around the ears and joins 2.1m of oxygen tubing, with a connector at the end for the oxygen supply. Nasal prongs deliver oxygen into the nostrils at low flow, and because nothing covers the mouth they are usually easier to talk and eat with than a mask. Oxygen therapy is prescribed, so the device and flow rate should be chosen by a doctor or clinician.
Features
- Two soft, flexible nasal prongs for a comfortable fit
- Lightweight tubing that loops over the ears
- 2.1m oxygen supply tubing with end connector
- Adult size
- Leaves the mouth uncovered
- Aero Healthcare code DSNA102
Specifications
- Brand: Aero Healthcare
- Product code: DSNA102
- Size: adult
- Tubing length: 2.1m
- Prongs: soft, flexible, two-prong
- Use: low-flow oxygen delivery
- Not published: connector type, latex status, cleaning and replacement instructions
How a nasal cannula works
Oxygen flows from a cylinder or concentrator, along the tubing and out through the two prongs into the nostrils, where it mixes with the air the patient breathes in. Because it is open to room air, it is a low-flow device: the oxygen concentration the patient actually gets depends on the flow rate and on how they breathe. The doctor or clinician sets the flow rate, and oxygen is treated as a medicine, so follow the prescription rather than adjusting it yourself.
Nasal prongs or a mask?
Prongs are lighter and less confining than a mask, but the clinician decides which device and flow rate a patient needs. In an emergency, trained responders choose oxygen equipment according to their training and protocols; higher concentrations are usually given by a mask with a reservoir bag, such as our adult non rebreather mask. If you only need to replace the supply line, see our oxygen tube with vinyl connectors. The connector type, latex status and cleaning instructions are not published for this cannula, so check the fit with your oxygen supply, and ask us before ordering if you have a latex allergy.
Fitting it, and oxygen safety
Place the prongs just inside the nostrils with the curve facing down, loop the tubing over each ear and slide the toggle under the chin until it is snug but not tight. Set the flow your prescriber specified, and don’t change it unless they tell you to. Oxygen makes things burn much more readily, so never smoke, vape or use an open flame near it, and keep oils, grease and petroleum-based products away from the equipment. This is a different product from an IV cannula, which is a needle and catheter placed into a vein.
Nasal Cannula FAQs
How does a nasal cannula work?
Oxygen from a cylinder or concentrator flows through the tubing and out of two prongs placed just inside the nostrils. It mixes with room air as the patient breathes in, so it is used for low-flow oxygen.
How do you put on a nasal cannula?
Place the prongs in the nostrils with the curve facing down, loop the tubing over the ears, and slide the toggle under the chin until it is snug. Then turn on the oxygen at the prescribed flow.
Can you wear one all day?
Wear it for as long as your oxygen is prescribed. Check the skin behind the ears and around the nose for soreness, and ask your clinician or oxygen provider about how often to replace it.
Can it go in your mouth?
It is designed for use in the nose. If the patient breathes mainly through the mouth, or you are worried they are not getting enough oxygen, ask the clinician.
How do you clean it?
Cleaning and replacement instructions are not published for this model, so follow your oxygen provider’s advice. Replace it if it becomes damaged or soiled.
Is a nasal cannula the same as an IV cannula?
No. This product delivers oxygen through the nose. An IV cannula is a thin tube placed into a vein to give fluids or medicines.
| Manufacturer_ms | Germany |
|---|---|
| Model Number_ms | K61SD521 |
| Ecolabel_ms | yes |
| Brand | Aero Healthcare |