Actichem Biosan II Hospital Grade Disinfectant Spray 750ml - Ready to Use

Biosan II Ready to Use is a hospital grade disinfectant from Australian manufacturer Actichem, supplied as a 750ml disinfectant spray with a trigger sprayer. It is listed with the TGA as AUST L 332364 and is proven to kill SARS-CoV-2, the virus that causes COVID-19, along with bacteria, viruses, fungi and spores, according to Actichem. It needs no dilution, has a pH of 7.5 and a lemon verbena fragrance, and is used on hard and soft surfaces in clinics, first aid rooms, offices and homes.

Features

• Ready to use, no mixing or dilution
• Hospital grade, TGA listed (AUST L 332364)
• Proven to kill SARS-CoV-2, plus bacteria, viruses, fungi and spores (manufacturer claim)
• pH 7.5, non-hazardous formulation
• Woolsafe, Cleanseal and GECA approved, Kosher Australia
• Lemon verbena fragrance

Specifications

• Brand: Actichem
• Product: Biosan II Ready to Use
• Volume: 750ml trigger spray bottle (also made in 500ml and 5L)
• Registration: AUST L 332364 (TGA listed)
• Contact (dwell) time: 10 minutes
• pH: 7.5
• Active ingredient: quaternary ammonium compound blend (twin chain), under 1 percent (as listed by suppliers)
• Fragrance: lemon verbena
• Surfaces: hard and soft surfaces including vinyl, rubber, ceramic, concrete, plasterboard, upholstery and carpet

How to use this disinfectant spray

• Clean off visible dirt first: disinfectants work best on a surface that has already been cleaned.
• Spray the surface, or apply with a sponge or scrubber, and agitate.
• Leave it wet for the full 10 minute dwell time.
• Rinse with clean water, as Actichem directs.
• Read the label and safety data sheet before use, and follow your site cleaning procedure.

Why choose a hospital grade disinfectant spray?

In Australia the TGA defines a hospital grade disinfectant as one suitable for general purpose disinfection of building and fitting surfaces in premises used for the investigation or treatment of a disease, ailment or injury. Products that claim to kill viruses must be listed on the ARTG before they can be supplied, which is why Biosan II carries an AUST L number. That makes it a sensible choice for first aid rooms, treatment areas, gyms and shared work surfaces, for example wiping down a clinical step stool between patients or the lid of a pedal bin.

What it is not

It is a surface disinfectant spray, not a hand sanitiser or skin antiseptic, so do not apply it to skin or wounds. The TGA describes hospital grade disinfectants as not intended for instruments or surfaces likely to come into contact with broken skin, so it is not an instrument disinfectant or sterilant. Actichem notes it will affect the stain-resistant treatment on 5th and 6th generation nylon carpets, so test a hidden area first.

Never mix it with bleach or other cleaning chemicals. Browse more cleaning wipes and swabs.

Disinfectant Spray FAQs